- Its exterior is made of high strength synthetic materials.
- It consists of 6 display areas with single or multiple areas showing the metal position.
- The built-in high brightness diode indicator light can accurately indicate the alarm area.
- The sensitivity of each area can be adjusted alone. The adjustable sensitivity range is 0-99.
- The automatically winded “emitting-receiving” loop features accurate and firm design. Superior detecting capacity.
- Automatic recording of alarming times and number of people passed.
8 doors can be put side by side at intervals of only 35 mm without mutual interference.
- It has adopted advanced digital self-balancing technology to overcome omission and misinformation.
- The separated power design can ensure normal operation under extremely unstable voltage conditions.
- With fixer equipped at its bottom
It is harmless to pacemaker in human body, pregnant woman or software products.
- At present, the equipment has become a model of choice in courts, Procu ratorates, etc of China for their security inspection.
- Uouou is basically having 6 Zones
- Each six zone is divided from head to toe to detect high to low level
- 0-99 sensitivity levels are all working to 0.2mm substance too
- 24 led pair lights for indication of metal in suspected
- low-high two types of alarms
Product passage dimensions: 2050 mm*700 mm*500 mm
Packaging dimensions consist two parts:
Detecting board 2290 mm*570 mm*200 mm (80 Kg)
Host machine 770 mm*490 mm*290 mm (18 Kg)
Working power: 30 W, Working power: (100 v-240 v)+-10%
1. Pass Counter is just a counting where it counts each and every single person whom detected with metal or not.
2. Alarm Counter is actually counting the detected person whom you instruct to detect the levels of material in. In simple words if you set 1st Level Sensitivity to 15 then it Escapes small equipments like;
Keychain, Needle, Metal Buttons & all those elements with Minimum Metal Quantity, but if you set the value to 25/35/45 then its level goes high and detects these materials too. Such you can set 0 to 99 on each level. Zero is minimum (can’t able to detect anything) and Ninety-nine is Higher Point(able to detect needle too).
Follow these instructions to program your Walk through Gate;
To Enter Programming Process Press Setup Button then Press Enter, Type Password 1234 then Enter if you Receive C000 then Its means you have entered correct password or if you Receive E000 then its means you didn’t enter correct password. You can use Select button as value acceptor and Enter as Save. Avoid Pressing Reset Button because it will reset to Factory Default.
Options in Menu are like;
1. Volume: There are three values in volume section 1, 2, 3. one means (Low), Two Means (Medium), Three Means (High).
2. Levels/Zones: There are 6 Zones with 99 Sensitivity Levels. Zones Start from Top to Ground dividing in different sections like head to toe. Please set the default values as following or set all levels to Zero and maintain it by your customer’s demand.
1 Level: Value = 10, 2 Level: Value = 25, 3 Level: Value = 40, 4 Level: Value = 35, 5 Level: Value = 55, 6 Level: Value = 40.
By Customer’s Requirement:
Set all Level Value’s to Zero and Take Cell Phone in Level 1 and Start changing Values from 0 to 5 and then check Level 1 it detects or ignore cell phone if detects then set value to 4 and check again if vice versa then set value to 3 and check again, if cell was ignored then you have to check heavy metal like Guns, Knife, Bullets, Nut-Bolts etc. Same Settings applied on all the levels. If you have any problem then call manufacturer or supplier.