Automatic Bollards

 285,000

ome of the advantages of Automatic Bollards are;

  • To protect roller shutters or loading bays from ram-raid attempt
  • To prevent the general public from entering restricted areas
  • To ensure that drivers pay the parking fee at private parking areas
  • To prevent vehicles from encroaching into pedestrian areas
  • To permit only authorised types of vehicles onto a particular site

Automatic bollards from Auto Mate Systems Limited are both functionally, and, aesthetically pleasing.  Fixed, removable or retractable variations can also be specified to suit the specific requirements, when installed alongside an automated/hydraulic system.

 

heavy duty hydraulic power pack or a very quiet pneumatic power unit. The power units are capable of lowering or raising the bollards more than 100 times a day in less than 4 seconds. Our PAS68 rated bollards are highly resistant and can stop vehicles of up to 15 tons travelling at a pace of 44 mph; sufficient to prevent the strongest malicious intent from being carried out successfully. Our anti-terror bollard has the facility to be fitted with an emergency hydraulic booster unit to allow the bollard to be fully raised in 0.8 seconds in the event of a serious imminent attack.

Our wealth of experience in installing automatic bollards allows us to install them with minimal disruption to your site. We can interface the bollards with any existing access control, or provide a new system for you to use. For example, the bollards can be operated via Radio Fobs, Proximity Cards, GSM Access or Push Button control.

Category:
  • Description

Product Description

Driven rod out of the ground Ø280 x h.800 mm (± 3 mm) x th.10mm, steel Fe 510 (S 335 JR) *
Buried structure 560 x 560 x h.1140 mm
Foundation Reinforced concrete
Excavation 1000x1000x1400mm
Break-in resistance 667 000 J
Driven rod treatment Cataphoresis and coating RAL7015 standard, other colour on request
Passive visibility Reflective film H=100 mm **
Flange Cast iron, cataphoresis black
Top cover Cast iron, cataphoresis black
Bollard Actuator Hydraulic
Power 230 Vac ±10%, 50-60 Hz
Working time Rise time: ≤ 7.0 s (50 Hz)
Lowering time: 4.0 s (50 Hz)
Working temperature -40°C *** to +60°C
Operating humidity Up to 100%
IP grade IP67
Hand Operation 

 

 

Interrupting the power off :
– Standard version: bollard will open.
– Security version: bollard will stay up. Lower the bollard by means of a solenoid valve which is accessible from the ground flange.
Weight including packaging 260 Kg

 

Bollard Electrical Test Specification

Bollard control unit PERSEO CBD or PERSEO CBE
Power 1-phase 230 Vac ±10%, 50-60 Hz (115 Vac with optional adapter)
IP grade IP54
Working temperature -40°C to +60°C
Operating humidity Up to 95% non-condensing
Use Max. 4 for each control unit. Parallel control wiring possible for driving many groups of bollards
Power absorbed 0.55 kW for each bollard
Signalling (optional) On top with high intensity LEDs and buzzer
Bollard sensors Open passage, Close passage (PERSEO CBE), Overpressure/Obstacle, Anti-tampering switch (option)
Local remote control – Digital inputs
– Radio remote control
– RS485, TCP/IP (option, PERSEO CBE only)