Technical parameters:
Outer frame: 2200(h) *900(w) *810mm(d)
Inner frame: 2000(h) *800(w) *570mm(d)
Working power: AC: 110V-220V
Work envionment: -20° C— +65° C
Brief description and advantages:
Detecting zones: 6 zones
Portable and Permanent Security
Head-to-Toe, Zone Specific Detectio
Sensitivity from 0-299, total 300 levels. It is adjustable.
Led display on the both sides
DSP and Microprocessor controlled
Light weight, can be transported in a car or van
Optional built in back-up battery
Single person assembly without tools – in less than 5 minutes
Three Sensor Zones with Brilliant LED Detection Indicators
Environmentally sealed keypad with security access control
Brilliant LED Bar Graph Indicates Target Strength
Memory Feature Stores Settings for Multiple Operating Environment
Multi-Mode Traffic Counter
Factory and User Definable Presets
Access Menus/Password Protection
Adjustable Volume Control
Warranty: Limited12 months, parts and labor
PACKING:
One set gate should be packed in one carton:
Carton size: 107cm x 68cm x 71cm
Total net weight: 35KG
Total gross weight of one set: 48kgs

Programming of UOUOU Walk Through gates are simple because we want every user to Program these gates friendly. Uouou has a aim to set every device in easiest way to every public sector. We have Set Default Password for Menu is 1234. If this password lost or you forget your changeable password then contact maintenance depart or purchaser to issue new password or further assistant. We have already Put a complete manual in Control Panel of Walk-Through Gate (Small Box).

Follow these instructions to program your Walk through Gate;
To Enter Programming Process Press Setup Button then Press Enter, Type Password 1234 then Enter if you Receive C000 then Its means you have entered correct password or if you Receive E000 then its means you didn’t enter correct password. You can use Select button as value acceptor and Enter as Save. Avoid Pressing Reset Button because it will reset to Factory Default.

Options in Menu are like;
1. Volume
2. Levels/Zones
3. Buzzer

Explain:
1. Volume: There are three values in volume section 1, 2, 3. one means (Low), Two Means (Medium), Three Means (High).

2. Levels/Zones: There are 6 Zones with 99 Sensitivity Levels. Zones Start from Top to Ground dividing in different sections like head to toe. Please set the default values as following or set all levels to Zero and maintain it by your customer’s demand.

By Default:
1 Level: Value = 10, 2 Level: Value = 25, 3 Level: Value = 40, 4 Level: Value = 35, 5 Level: Value = 55, 6 Level: Value = 40.

By Customer’s Requirement:
Set all Level Value’s to Zero and Take Cell Phone in Level 1 and Start changing Values from 0 to 5 and then check Level 1 it detects or ignore cell phone if detects then set value to 4 and check again if vice versa then set value to 3 and check again, if cell was ignored then you have to check heavy metal like Guns, Knife, Bullets, Nut-Bolts etc. Same Settings applied on all the levels. If you have any problem then call manufacturer or supplier.